Kitchen Remodel Cost in Kennesaw, GA

The big picture: what a kitchen remodel costs in the Atlanta area

Block Renovation, which analyzes permit data, reports an average Atlanta kitchen remodel cost of about $74,666 across projects permitted from March 2021 through January 2026. That average includes everything from simple updates to full high-end renovations, so your project may be lower or higher depending on scope. The same source notes that cabinets typically take 25% to 35% of a kitchen budget and labor 20% to 35%, which are the two largest categories by far.

The most helpful way to think about cost is in layers. The base layer is demolition, disposal and rough plumbing and electrical. On top of that come cabinets, countertops, flooring and appliances. The final layer is finishes and extras: backsplash, lighting, hardware and special features. Each layer has a wide range, and decisions in one layer affect the others.

Kitchen remodel cost breakdown by item

The table below summarizes typical published ranges for the main kitchen components. These are not quotes, and your actual number depends on size, quality and layout.

Appliance and structural costs

Appliances can swing a budget dramatically. A basic refrigerator and range can cost a fraction of a professional package. Structural and mechanical changes are the other big swing factor. Moving a sink, relocating a gas line, upgrading the electrical panel or removing a wall each add cost beyond cabinets and counters.

What it costs to gut a kitchen

If your kitchen is being taken down to the studs, there is a base cost before new finishes. Published figures list demolition at roughly $2,000 to $5,000, disposal at $500 to $1,500, wall repair and preparation at $1,000 to $3,000, rough plumbing and electrical at $3,000 to $8,000 and permits and inspections at $500 to $2,000. That puts the gutting and rough-in layer at roughly $7,000 to $19,500 before a single cabinet is installed. Labor rates for skilled trades are listed at $50 to $150 per hour.

Older Kennesaw homes sometimes reveal surprises during demolition, such as outdated wiring, hidden water damage or non-code framing. We recommend a contingency of about ten percent of the budget for those conditions.

How to control kitchen remodel cost

• Keep the layout. Not moving the sink, range and refrigerator saves plumbing, gas and electrical changes.
• Choose semi-custom cabinets. They offer many sizes and finishes at a lower price than custom.
• Mix materials. Splurge where you will notice it, such as the island counter, and save on perimeter surfaces.
• Consider refacing. If your cabinet boxes are sound, new doors and veneer can cost much less than replacement.
• Plan appliances early. Cabinet and countertop cutouts depend on appliance sizes.
• Phase work wisely. Combining kitchen and flooring work avoids doing things twice.
• Get a detailed written scope. Line items make comparing bids and tracking changes easier.

We often show homeowners two or three budget tiers for the same kitchen so they can see what each level buys and decide where to invest.

What a mid-range kitchen remodel looks like

A typical mid-range remodel for a Kennesaw kitchen of average size might include new semi-custom cabinets, quartz countertops, a tile backsplash, new flooring, updated lighting, a new sink and faucet and mid-range appliances, with the existing layout retained. Upgrading to a larger island, relocating appliances or adding a pantry increases cost. A premium remodel might add custom cabinets, natural stone, professional-style appliances and structural changes such as removing a wall.

Because published ranges vary so much, we recommend getting a written scope and price from a licensed contractor, not relying on online calculators. During your free consultation we measure the room and give you a realistic range based on the materials you actually want.

Three sample budget paths

Instead of a single number, it helps to picture three paths a Kennesaw homeowner might take. The first is a refresh: keep the layout and cabinet boxes, reface or paint, replace countertops, add a backsplash, update lighting and swap hardware. This path focuses money on the surfaces you see and touch daily and avoids plumbing and structural costs. The second is a full mid-range remodel: new semi-custom cabinets, quartz counters, new flooring, a tile backsplash, mid-range appliances and updated electrical, still keeping the sink and range in place. The third is a layout-changing remodel: removing a wall, relocating plumbing or gas, adding an island, upgrading the electrical service and choosing higher-end cabinets and appliances. Each path is a legitimate choice, and the right one depends on how long you plan to stay, how the kitchen works for you today and what you want from the room.

Because published ranges are broad, we price each path in writing for your actual kitchen. That lets you compare what each level buys, see the cost of specific upgrades such as moving a sink or adding an island and make an informed decision. If your budget is firm, we design backward from it and tell you honestly what is realistic.

Cost versus value: how to think about return

Kitchen remodels are one of the most common projects homeowners ask about when they are thinking about resale. Industry cost-versus-value studies generally show that mid-range kitchen updates recover a meaningful share of their cost at sale, while very high-end projects recover a smaller share. We cannot promise a specific return for your home, and it depends on your neighborhood, your market and how the kitchen compares with others nearby. A useful rule of thumb is to avoid over-improving relative to the homes around you and to put money into elements buyers consistently notice: functional layout, clean cabinets and counters, good lighting and updated appliances. If you plan to stay in your home for many years, the best investment is the kitchen you will enjoy using every day.

Timeline and permits

Most kitchen remodels take several weeks on site, with an additional lead time for cabinets that can run several weeks. Permits are typically required when plumbing, electrical or structural work changes. Properties inside Kennesaw city limits are permitted through the City of Kennesaw, and unincorporated addresses through Cobb County. We confirm requirements for your address and handle the application.

Neighborhoods we serve

We remodel kitchens across Kennesaw, including areas near Barrett Parkway, Cobb Parkway, Bells Ferry Road and Big Shanty, in ZIP codes 30144 and 30152, and in nearby Marietta, Acworth, Woodstock and Smyrna.

Why homeowners choose Oak & Mason

Oak & Mason is licensed and insured, and our work is backed by a warranty. We provide a written scope and price, protect your home, clean daily and reply to questions the same day. Every project starts with a free consultation.

Verify your contractor before you build

Before you sign anything for Kitchen Remodel Cost in Kennesaw, confirm the contractor’s license. Georgia licenses residential and general contractors through the Georgia Secretary of State, so ask any builder for their license details up front. Oak & Mason is licensed and insured, and we are glad to walk you through how that protects your Kitchen Remodel Cost in Kennesaw project. If you are comparing bids for Kitchen Remodel Cost in Kennesaw, ask each builder for the same written scope so the numbers line up. A clear scope, schedule and payment plan make Kitchen Remodel Cost in Kennesaw far easier to manage. When Kitchen Remodel Cost in Kennesaw is planned well, the finished work feels like it was always part of the home.

Frequently asked questions