Tub-to-Shower Conversion in Kennesaw, GA

Why homeowners convert tubs to showers

Most Kennesaw homes built in the 1990s and 2000s have a standard 60-inch alcove tub with a fiberglass or tile surround, and many of those tubs are used mainly for showering. Replacing the tub with a shower changes the room in several ways.

• Easier access. A low-threshold or curbless shower is far easier to enter than stepping over a tub wall, which matters for aging in place and for anyone with limited mobility.
• Easier cleaning. Fewer caulk lines and a larger open area mean less scrubbing than a tub-shower combo with a curtain.
• A more open feel. Glass enclosures let light and sightlines pass through the bathroom, which makes small baths feel larger.
• Updated design. New tile, fixtures, niches and a rain-style or handheld showerhead make a dated bathroom feel current.
• Resale appeal. A well-built shower is a feature many buyers look for, especially in a primary bathroom.

If you have only one bathtub in the home and you have young children or plan to sell, think about whether you will want a tub elsewhere. We discuss that trade-off openly so you do not remove the only tub in the house without a plan.

Shower types: prefab, tiled or curbless

The right shower depends on your budget, your timeline and how long you plan to stay.

A standard conversion keeps the shower in the same footprint as the old tub. If you want a larger shower, we can sometimes borrow space from an adjoining closet or linen cabinet, but that requires a plumbing and framing review.

What a tub-to-shower conversion costs

Costs depend on whether you choose a prefab unit or a custom-tiled shower, how much plumbing has to move and the finish level. Published 2026 bathroom cost data (Block Renovation) lists a prefab acrylic shower surround installed at about $1,500 to $3,000, a custom-tiled shower with a glass enclosure at roughly $5,000 to $12,000, and tub replacement including demolition, plumbing and surround at about $2,000 to $9,400. The same source shows a mid-range primary bath remodel at $25,000 to $50,000, which puts a conversion in context when it is part of a larger project.

These are ranges, not quotes. Your price depends on the shower size, tile and fixture selections, whether the drain or valve must move and the condition of the subfloor and walls once the tub is out. We provide a written price after a free consultation.

How we do a conversion

1. Consultation and layout. We measure the space, discuss shower type, glass and storage and identify plumbing and venting requirements.
2. Demolition. The tub and surround are removed down to the studs and subfloor. We inspect for hidden moisture damage and rot.
3. Plumbing and framing. Valves, drains and any bench or niche framing are installed. Blocking for grab bars is added when requested.
4. Waterproofing. A continuous waterproofing membrane is applied to walls and floor, and the pan is flood tested before tile.
5. Tile or surround installation. Tile is set and grouted, or the prefab surround is installed and sealed.
6. Glass and fixtures. The enclosure, showerhead, controls and accessories are installed and tested.
7. Final walkthrough. We check slope, drainage, caulk lines and operation of every fixture.

Most conversions take about a week to two weeks on site, longer for fully custom tile or when hidden repairs are needed. During that time you will not have use of that shower, so we plan around any second bathroom you can use.

Waterproofing and ventilation: where showers succeed or fail

A shower is only as good as its waterproofing. Tile and grout are not waterproof by themselves; they sit on top of a membrane and a properly sloped pan. We use a continuous membrane system, seal corners and penetrations and test the shower pan with water before tile is installed. We also review bathroom ventilation. A quiet, properly ducted exhaust fan removes moisture so paint, caulk and tile last longer and mildew stays away. Georgia humidity makes this especially important.

If water damage is found behind the old tub, we explain what we see and what it will take to repair. Hidden damage is more common than homeowners expect, especially around old tub drains and around fiberglass surrounds that have cracked over time.

Design choices that make a converted shower feel custom

Once the tub is gone, you have room to design the details that make a shower feel finished. A recessed niche keeps shampoo off the floor and avoids hanging caddies. Large-format porcelain tile reduces grout lines and makes the shower easier to clean. A linear drain allows a single-slope floor and a cleaner look. Frameless glass opens the space visually, while a fixed glass panel with no door works well in a larger shower and removes hardware to clean. A handheld sprayer on a slide bar helps with cleaning the shower itself, bathing children and pets, and sitting comfortably.

Lighting and finishes matter too. A waterproof recessed light above the shower, a matching vanity light and consistent metal finishes on the showerhead, faucet and hardware tie the room together. If the bathroom has a window, we plan privacy glass or a treatment that tolerates moisture. We bring tile and fixture samples to your home so you can see them in the actual light before you decide.

Finally, think about what stays and what goes. The old tub deck, the surround height and the placement of the valve all affect the final layout. Raising the showerhead height, for example, is easy during a conversion and makes a big difference for taller family members.

Permits, HOAs and neighborhoods

Replacing a tub with a shower in the same location often involves plumbing changes that require a permit and inspection under Georgia code. We confirm what applies to your address, whether inside the City of Kennesaw or in unincorporated Cobb County. HOA communities rarely regulate interior bathroom work. We handle conversions across Kennesaw, including areas near Barrett Parkway, Cobb Parkway, Bells Ferry Road and Big Shanty, in ZIP codes 30144 and 30152, and in nearby Marietta, Acworth, Woodstock and Smyrna.

Why Kennesaw homeowners choose Oak & Mason

Oak & Mason is licensed and insured, and our work is backed by a warranty. We give a written scope, keep your home clean, protect floors and answer questions the same day. Because waterproofing is the part that cannot be rushed, we never skip steps to hit a schedule. Every project starts with a free consultation.

Verify your contractor before you build

Before you sign anything for Tub-to-Shower Conversion in Kennesaw, confirm the contractor’s license. Georgia licenses residential and general contractors through the Georgia Secretary of State, so ask any builder for their license details up front. Oak & Mason is licensed and insured, and we are glad to walk you through how that protects your Tub-to-Shower Conversion in Kennesaw project. If you are comparing bids for Tub-to-Shower Conversion in Kennesaw, ask each builder for the same written scope so the numbers line up. A clear scope, schedule and payment plan make Tub-to-Shower Conversion in Kennesaw far easier to manage. When Tub-to-Shower Conversion in Kennesaw is planned well, the finished work feels like it was always part of the home. Call (470) 847-9076 for a free consultation about Tub-to-Shower Conversion in Kennesaw.

Frequently asked questions